Power Tools

PAINT MIXER 80 X 400....

Tork Craft Set Of Brushes For BJ02 Biscuit Joiner At a Glance; Replacement carbon brushes for Tork Craft BJ02 biscuit joiner The Tork Craft Set Of Brushes For BJ02 Biscuit Joiner is a genuine spare part designed to keep your biscuit joiner performing as it should. Carbon brushes wear down over time, especially on busy tools. Replacing them with the correct BJ01-2 brush set helps restore motor power, reduce sparking and extend the life of your Tork Craft BJ02 biscuit jo..

Biscuit joiner spare part Application: This is a spare field coil (stator) for the Tork Craft BJ02 biscuit joiner.....

Biscuit joiner spare part Application: This is a spare switch for the Tork Craft BJ02 biscuit joiner.....

Biscuit joiner spare part Application: This is a spare slide hook attachment for the switch on the Tork Craft BJ02 biscuit joiner.....

Biscuit Joiner - 900W 11000RPM Wattage: 900W Cuts Slots for: #0, #10 & #20 Rotation speed: 11000 RPM Application: A biscuit joiner is a woodworking tool used to join two pieces of wood together. It uses a small circular saw blade to cut a crescent-shaped hole in the opposite edges of two pieces of wood or wood composite panels. An oval-shaped, highly-dried and compressed wooden biscuit (made from beech wood) is covered with glue, or glue is applied in th..

Biscuit joiner spare part Application: This is a spare armature for the Tork Craft BJ02 biscuit joiner.....

Biscuit joiner set Wattage: 900W Rotation speed: 11000 RPM The set includes A box of No. 20 biscuits. Application: A biscuit joiner is a woodworking tool used to join two pieces of wood together. It uses a small circular saw blade to cut a crescent-shaped hole in the opposite edges of two pieces of wood or wood composite panels. An oval-shaped, highly-dried and compressed wooden biscuit (made from beech wood) is covered with glue, or glue is applied in the slot. Th..

TorkCraft - Stainless Burnishing Machine Handle: Long Discs: 100 x 120mm Power Input: 800W No Load Speed: 900-2800 R/min Rated Voltage: 220V - 50Hz    Application: The Tork Craft Burnishing is used for grinding, polishing and fine polishing of stainless steel metals, plastics and woods Professionally manufactured for the automotive paint care and detailing industries. Ergonomically designed to reduce fatigue in long term use. Long handle for reach Belts Fo..

Tork Craft Polisher Service Kit Spindle Lock Comp. 17/18 For MY3015-2 At a Glance; Genuine spindle lock replacement kit for MY3015-2 polisher The Tork Craft Polisher Service Kit Spindle Lock Comp. 17/18 For MY3015-2 is a genuine spare kit designed to bring your polisher’s spindle lock back into reliable working order. Over time, the spindle lock mechanism can wear or become damaged, making it difficult or unsafe to change backing pads and accessories. This MY3015-2-SK01 kit..

Tork Craft Polisher Serv. Kit Gear Box Cover And Screw (12/19/20) For MY3015-2 At a Glance; Genuine gear box cover and screw kit for MY3015-2 polisher The Tork Craft Polisher Serv. Kit Gear Box Cover And Screw (12/19/20) For MY3015-2 is a genuine replacement kit that restores the front gear box housing on your polisher. Over time, the cover or its mounting screws can become cracked, stripped or damaged through knocks and heavy use. This MY3015-2-SK02 kit supplies the correc..

Tork Craft Polisher Service Kit Gear & Bearing Comp. (1-11) For MY3015-2 At a Glance; Genuine gear and bearing kit for MY3015-2 burnishing machine The Tork Craft Polisher Service Kit Gear & Bearing Comp. (1-11) For MY3015-2 is a factory-approved set of drive components for the MY3015-2 stainless burnishing machine. Continuous heavy use can eventually wear gears and bearings, causing noise, vibration and loss of power. This MY3015-2-SK03 kit groups the main gear and bearing ..